Solar Hybrid Static Ups

solar hybrid static ups

TECHNICAL SPECIFICATION

MODEL

2.75 KVA

3.75 KVA

5.2 KVA

7.5 KVA

10 KVA

NOMINAL BATTERY VOLTAGE

48 VDC

96 VDC

120 VDC

SOLAR PANEL CONNECTED FOR 50AMPS PWM CHARGE CONTROLLER (MAX.)

3000 Wp

6000 Wp

7500 Wp

8000 Wp

AC MAINS MODE

INPUT VOLTAGE RANGE (NORMAL MODE)

100 to 290 VAC + 5 VAC (Wide Range)

INPUT VOLTAGE RANGE (NORMAL MODE)

180 to 260 VAC + 5 VAC

INPUT VOLTAGE RANGE (UPS MODE)

< 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)

CHANGEOVER TIME MAXIMUM

SA to 18A + 1A (User Programmable)

MAX. CHARGING CURRENT

14 VDC to 15 VDC 1 0.2 VDC per Battery (User Programmable)

BOOST CHARGING VOLTAGE

14.4 + 0.2 VDC per Battery for Tubular
13.8 + 0.2 VDC per Battery for SMF

BOOST CHARGING VOLTAGE (FACTORY DEFAULT)

13.7 + 0.2 VDC per Battery for Tubular
13.5 + 0.2 VDC per Battery for SMF

BATTERY BACKUP MODE

OUTPUT VOLTAGE AT NO LOAD

220 VAC + 7 VAC

OUTPUT FREQUENCY

50.0Hz + 0.5Hz

OUTPUT WAVE FORM (AT NO LOAD)

100% Pure Sine Wave

BATTERY LOW ALARM

10.6 + 0.2 VDC Per Battery

BATTERY LOW PROTECTION

10.4 + 0.2 VDC Per Battery

OVERLOAD (NORMAL/UPS)

120% (30 Sec.)

SHORT CIRCUIT (NORMAL/UPS)

300%

CHARGING MODE

MAX. CHARGING CURRENT

SA to 30Amp. 1.5Amp. (User Programmable)

CHARGE CONTROLLER EFFICIENCY

> 98%

DESCRIPTION OF SWITCHES ON FRONT PANEL

S.NO.

SWITCH

FUNCTION(S)

SWITCH LED STATUS

1. POWER

ON/OFF the UPS Output

System ON - Led ON
System OFF - Led ON

2. INV/UPS

When it is Short Pressed it Enables UPS/Inverter Mode Selection
When it is Long Pressed Enables the UPS Parameter Setting :
The LCD Displays : “Edit Parameters Setting”
The Switches function now Change to :
POWER - Enter/OK Switch
INV/UPS - Increment Value
SMF/TUB - Decrement Value
HYBRID/PCU - Back/Exit Switch

UPS Mode ON - Led ON
UPS Mode OFF - Led OFF

3. SMF/TUB

When it is Short Pressed it Enables TUBULAR or SMF Battery Selection

System ON - Led ON
System OFF - Led ON

4. HYBRID/PCU

When it Short Pressed it Enables the Hybrid PCU Mode Selection

PCU Mode - Led ON
Hybrid Mode - Led OFF

DESCRIPTION OF CENTER LED ON FRONT PANEL

S.NO.

LED

DESCRIPTION

1. GREEN

LED ON - Full Solar Used
LED Blinking - Partial Solar Used
LED OFF - No Solar Used

2. RED

LED ON - PV Reverse Protection
LED OFF - No Protection Selected

CONVENIENCE

Solar Hybrid DSP uses both Solar Power as well as A.C. Mains for charging the battery bank according to priority setting providing the users availability of uninterrupted power supply.

User friendly Wide LCD display for battery user interface

Smart Load sharing compatibility.

Monitoring/data logging feature for better system information at user end (optional) Selectable charging current with high charging (HI) and Normal Charging (Low)

PV availability, battery charging from solar power indication with solar power priority User friendly, control and selection switches with LCD indication on front panel

Protections such as Mains MCB Trip, Overload, Short circuit, Battery low, over temperature indication with buzzer as well as display on LCD available

Power Saving through No Load Shutdown Feature

High tensile, acid resistant Polyster Gauntlets

Maximum Solar Power Utilization during charging and backup mode

PV pole reversal protection indication on LCD Deep discharge battery charging from A.C. Mains as well as Solar

No humming Noise(Silent UPS)

AC Mains available, battery charging/charged and it voltage indication provided on LCD display

Operate on both Solar Power as well as Grid Power

It is Integrated with in-built fully regulated 50Amp PWM Solar Charge Controller for maximum Solar Power Utilization

It senses the availability of Solar power, Grid power and accordingly gives preference to charging through solar power and switches to the grid power is not available

It is designed to give you maximum benefit from the solar energy and minimize your electricity bill drastically

Highly efficient battery charging from the solar energy as a result you will get non-stop power, save money, save electricity, and protect the environment

Indications for Mains ON, UPS ON, Battery Low, Charging/Discharging, Over Load, Short Circuit, Thermal Trip, Solar available/Not available and PV reverse on LCD Display

User-Friendly LCD for the display of mode of operation and all parameters

DUAL F1ODE OF WORKING : UPS AND NORMAL
1. Hybrid Mode : Intelligent battery charging though the Solar Power and Grid Power

DUAL BATTERY CHARGING F1ODE : TUBULAR AND SF1F BATTERY I"4ODE
-Different Battery selection mode to enhance the battery life

Double stage MOSFET Over Current Protection by measuring Rds ON

Intelligent overload sensing circuitry with auto retries facility Programmable thermal protection : cooling fan which operates as needed

High Power new generation MOSFET cable to handle high in-rush/ surge current Double stage MOSFET Over Current Protection by measuring Rds ON

Highest efficiency at lower cost

Pure Sine Wave Output with low Total Harmonic Distortion (THD)

High End ARM-Cortex based design of Solar Charge Controller for charging through Solar Power Eco-friendly operation

Solar PV reverse voltage protection Electronic Over Current Charging Protection

Reverse Current Flow Protection from Battery to Solar Panel generally during night No mechanical contact for charge Controller

Designed for continuous reliable and robust operationr